Welcome to
image

PT. INDOASIA THRIVETAMA


Jl. Daan Mogot no.119 Bl. A-6
Jakarta Barat 11510
Phone: 021-5663949, 021-5604314
Fax: 021-56639210

E-mail: sales@ilfheater.com
indoasia@ilfheater.com

Factory :
Jl Semanan II 2 RT 008/07
Komp. Industri Semanan, Kalideres
JAKARTA 11850

Tubular Heaters

 

 

 

Application
For heating almost any liquid or viscous materials including acids, water, synethetic oils, lube oils as well as air, gases, steam or low melting point solids.

Construction
The standard element consist of an 80/20 nickel chrome resistance wire which is connected to terminal pins, and centred in a metal tube. The tube is filled with high quality magnesium oxide and compressed to ensure a rapid heat transfer. The terminal pins from a non-heated section of the elements well as the terminal arrangement. They are insulated from the metal tube by ceramic bushes. Kilowatt rating and voltage can be varied to suit each application.

Our tubular heating elements form the basis of all products in this catalogue. They are manufactured from high quality materials in various sheath diameters. They can be supplied straight or bent to customers requirements.

MATERIAL SHEATH SELECTION AND APPLICATION :

  • COPPER
    Heating of fresh water free from chlorine or other aggressive chemicals. Copper elements may nickel plated to provide protection in certain applications. Maximum sheath temperature in water 180 ° C.
  • INCOLOY 800 / 840
    A nickel chrome alloy used for heating liquids where resistance to stress corrosion is required. Maximum sheath temperature 850 ° C.
  • STAINLESS STEEL 304
    Heating gases, where oxidizationof corrosion is likely. Selection will depend on the media to be heated and the operating conditions. Maximum sheath temperature 750 ° C
  • STAINLESS STEEL 316
    Heating liquids where corrosion is likely. Selection will depend on the media to be heated and the operating conditions. Maximum sheath temperature 750 ° C.
  • TITANIUM
    Heating aggressive liquids where other metal sheathed materials do not have the required corrosion resistance. Selection will depend on the chemical composite of the media to be heated. Maximum sheath temperature 500 ° C.

 

STRAIGHT LENGTH TUBULAR ELEMENTS OIL, AIR AND WATER IMMERSION


ILF Straight Length Elements can be formed to suit the heat pattern required. Special wattages, voltages, lengths, diameters and bushes can be supplied on customer's request.



OIL HEATERS
(31 Kw.sq.mt)

dia. 8.2 mm (31 Kw.sq.mt)
dia. 8.2 mm
Cat. No Watts Volts Dim 'A' Dim 'B' Cat. No Watts Volts Dim 'A' Dim 'B'
ILF41-SB 500 240 745 625 ILF41-SC 650 240 745 625
ILF42-SB 750 240 1060 940 ILF42-SC 1000 240 1060 940
ILF43-SB 1000 240 1370 1250 ILF43-SC 1350 240 1370 1250
ILF44-SB 1250 240 1685 1565 ILF44-SC 1700 240 1685 1565
ILF45-SB 1500 240 2040 1880 ILF45-SC 2000 240 2040 1880
ILF46-SB 1800 240 2415 2255 ILF46-SC 2500 240 2415 2255
ILF47-SB 2000 240 2700 2500 ILF47-SC 2700 240 2700 2500
ILF48-SB 2500 240 3330 3130 ILF48-SC 3400 2040 3330 3130